Boats For Sale:
Equalizer tubes for airguide speedos |
Post Reply 
|
| Author | |
Liledgy 
Groupie 
Joined: July-13-2011 Location: Midwest Status: Offline Points: 52 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Equalizer tubes for airguide speedosPosted: December-14-2011 at 11:25pm |
|
Im looking for a couple of the equalizer tubes that pressure up the speedos. They are near the gas tank. The pickups on the rear feed into them and then goes to the speedo. Thanks for the replys.
|
|
 |
|
|
8122pbrainard
Grand Poobah 
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41040 |
Post Options
Thanks(0)
Quote Reply
Posted: December-16-2011 at 10:56am |
|
NG,
Are your's missing or just split due to the pitot system being plugged filled with water and then frozen? They can be repaired by sweat soldering on a patch. If gone, new ones can be made with common copper sweat solder water tubing and fittings. |
|
|
|
|
Liledgy
Groupie
Joined: July-13-2011 Location: Midwest Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: December-17-2011 at 2:32am |
|
Pete, thanks for the info. My speedos were clogged when I bought boat. I cleaned pickups and they still don't work. I've been told the next probable step would be the tubes ( because of ice ). I'll have to pull tank to be 100% sure. I just wanted to have parts to replace before I pulled tank. I didn't know they were repairable. If I have to make new ones, theirs nothing special inside them? Just the tubes with fittings for the lines? Tim
|
|
|
|
|
8122pbrainard
Grand Poobah
Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41040 |
Post Options
Thanks(0)
Quote Reply
Posted: December-17-2011 at 9:29am |
|
Tim,
They are just hollow tubes. Keep us posted as to what you find. Have you tested the speedo's? You can use regulated air directly hooked up to the speedo. This will tell you more on where the problem is. You can also hook up the air at the aft and listen for leaks in the pitot system. I'd go this route before pulling the tank. 0 (start at 0) to 30 PSI will do it. |
|
|
|
|
Liledgy
Groupie
Joined: July-13-2011 Location: Midwest Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: December-17-2011 at 11:03am |
|
Thanks Pete. When I get a chance I'll pull it out of storage and see what I can find out.
|
|
|
|
|
lakedog55
Gold Member 
Joined: November-11-2010 Location: Lake Weir Fl Status: Offline Points: 835 |
Post Options
Thanks(0)
Quote Reply
Posted: December-20-2011 at 11:16pm |
|
I have some but have not pulled the tank yet keep posting if you are still in need will be after the first of the year
|
|
|
Lakedog55
|
|
|
|
|
Liledgy
Groupie
Joined: July-13-2011 Location: Midwest Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: December-21-2011 at 12:10am |
|
Lake, I'll take them thanks. Tim
|
|
|
|
|
lakedog55
Gold Member
Joined: November-11-2010 Location: Lake Weir Fl Status: Offline Points: 835 |
Post Options
Thanks(0)
Quote Reply
Posted: December-21-2011 at 9:05am |
|
Okay soon as I get some time to strip the other parts out They are yours. Hows $10.00 plus S and H should be flat rate Mike |
|
|
Lakedog55
|
|
|
|
|
Liledgy
Groupie
Joined: July-13-2011 Location: Midwest Status: Offline Points: 52 |
Post Options
Thanks(0)
Quote Reply
Posted: December-21-2011 at 6:10pm |
|
Mike, your very generous! Here's my email, stjmj5@sbcglobal.net and phone 815-693-9077. Tim
I didn't see a link to pm you. Thanks again |
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options