Project 67 Mustang |
Post Reply ![]() |
Page <1234> |
Author | |
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
So Kirk did you end up going to Sterling to pick the trailer up? Looks like your the rebuild thread to get us thru the winter!
|
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
Yes Gary I did, I just squeaked by that snow storm. The trailer is awesome.
|
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
I have just seen in your first pic,your boot stripe is the same as mine. I have never noticed any others that are the same, most seem to continue all the way to the front. Did Steve meet you in town and blindfold you for the ride out to the ranch? If you ever decide you need a new axle check with TimB he has a source and might have one for the springs too. I had trouble with the seal area on mine so I bought one and it fit fine. As you will find out when you eventually work on yours running gear parts are odd sizes compared to others.
|
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
![]() I had some time today to tinker and this is what I found ! |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
Sorry forgot to rotate the photo
![]() |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
![]() M 2198 is what the tag says. Is this what art needs to look up the invoice ? I found some old registrations it says she is a 69 . |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
TRBenj ![]() Grand Poobah ![]() ![]() Joined: June-29-2005 Location: NWCT Status: Online Points: 21141 |
![]() ![]() ![]() ![]() ![]() |
That's the hull number you're looking for. It's definitely not a '69 though. The number would seem to reinforce my previous guess.
I have a number of 68-70 mustang id numbers collected, the earliest verified is in the late 2200's and was a '68 built in sept of 67. I'd say yours is a late 67 or very early 68 based on the id and other trim details I see. What's in the battery box? |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
It's a frozen mouse nest.
It's funny you say it's older cuz there were about 6 or so old registrations in the side panel and all saying 69. How does one decipher the serial #s Did the fiber glass floor go all the way back ? |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
Looks like someone made the battery box hole bigger too, the edges are cut at 90 compaired to a radius. I have some floor pictures Kirk but will get them later,I can't get into photobucket for some reason and yes it goes quite a way back. Do you have the toe board? I have a decent one if you need it.
|
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
![]() Gary is the toe piece fiberglass ? I removed a piece of wood that was carpet wrapped |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
Yes it is Kirk it matches the floor and has ply glassed in on the back side to give it strength
|
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() ![]() |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
![]() ![]() |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
I don't have the piece that is behind the motor. Don't know it thereever was one.
The carpet was tacked with staples, I'm hoping it will clean up |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
In the end I used the same 3m compounds and pads that we use on the hull. Cleaned up really well.
|
|
![]() |
|
TRBenj ![]() Grand Poobah ![]() ![]() Joined: June-29-2005 Location: NWCT Status: Online Points: 21141 |
![]() ![]() ![]() ![]() ![]() |
There is no "decoding" the serial number, they were just sequential (with some exceptions). Art should be able to pull the build sheet on it and confirm the date.
It's pretty common for registrations to list the year incorrectly, you see it all the time. Apparently the DMV is not the authority on year to year changes at Correct Craft. ![]() A '69 would have had different seats, light, dash, scoops (style, placement, number), etc, as noted earlier in the thread. |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
Took the windshield off today and one side was plastic and the other glass?
Is the white molding still available somewhere? ![]() How would one fix this? |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
![]() Tim looks like these are original |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
john b ![]() Grand Poobah ![]() Joined: July-06-2011 Location: lake Sweeny Status: Offline Points: 3238 |
![]() ![]() ![]() ![]() ![]() |
The 69 SS Mustang I sacrificed had one glass pane and one plastic too The vinyl windshield deck channel is available Let me know if you can't read the numbers. Love your project!
|
|
1970 Mustang "Theseus' paradox"
If everyone else is doing it, you're too late! |
|
![]() |
|
TRBenj ![]() Grand Poobah ![]() ![]() Joined: June-29-2005 Location: NWCT Status: Online Points: 21141 |
![]() ![]() ![]() ![]() ![]() |
Yes, scoops are original, since I posted last year about not recognizing those rounded scoops, I've encountered a few 67 and early 68 boats with them.
Not sure what we're looking at in the "how do I fix this" pic? Motorbox looks good! |
|
![]() |
|
Riley ![]() Grand Poobah ![]() ![]() Joined: January-19-2004 Location: Portland, ME Status: Offline Points: 7952 |
![]() ![]() ![]() ![]() ![]() |
Kind of weird why the windshield frame broke where it attaches to the deck. We have a plastic panel in our Classic windshield. It was a challenge to put it together due to the plastic being slightly thicker than the glass. The color of the motor box is nice!
|
|
![]() |
|
john b ![]() Grand Poobah ![]() Joined: July-06-2011 Location: lake Sweeny Status: Offline Points: 3238 |
![]() ![]() ![]() ![]() ![]() |
Which side of your windshield is plastic, port or starboard? I believe the mounting tab on the windshield could be welded back on.
|
|
1970 Mustang "Theseus' paradox"
If everyone else is doing it, you're too late! |
|
![]() |
|
8122pbrainard ![]() Grand Poobah ![]() ![]() Joined: September-14-2006 Location: Three Lakes Wi. Status: Offline Points: 41040 |
![]() ![]() ![]() ![]() ![]() |
It's sure worth a try but, some alloys can't be welded. You won't know until the welder tries to develop the weld puddle. |
|
![]() |
|
dochockey ![]() Gold Member ![]() ![]() Joined: September-16-2009 Location: Colorado Status: Offline Points: 638 |
![]() ![]() ![]() ![]() ![]() |
Oh boy now your putting me to the test ![]() Uh the plastic was on the port side, the glass was on the starboard side I hope your going to Tell me you have the one I need ? And your willing to part with it. |
|
1989 Teal Ski Nautique
1967 Mustang Harris Float Sunfish |
|
![]() |
|
john b ![]() Grand Poobah ![]() Joined: July-06-2011 Location: lake Sweeny Status: Offline Points: 3238 |
![]() ![]() ![]() ![]() ![]() |
I can set you up with another plastic port side pane. Sorry. See if they can weld up your frame. If all else fails get back to me sometime. I will know a lot more when I get mine assembled.
|
|
1970 Mustang "Theseus' paradox"
If everyone else is doing it, you're too late! |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
Ken Meloon at the Taveres show was telling me how many halfs they used to go thru,I'm guessing the passenger is using it for a handle,while the driver used the wheel?
|
|
![]() |
|
john b ![]() Grand Poobah ![]() Joined: July-06-2011 Location: lake Sweeny Status: Offline Points: 3238 |
![]() ![]() ![]() ![]() ![]() |
The wheel doesn't work either Gary.
|
|
1970 Mustang "Theseus' paradox"
If everyone else is doing it, you're too late! |
|
![]() |
|
Gary S ![]() Grand Poobah ![]() ![]() Joined: November-30-2006 Location: Illinois Status: Offline Points: 14096 |
![]() ![]() ![]() ![]() ![]() |
I didn't ask how many wheels they had John
![]() |
|
![]() |
|
TRBenj ![]() Grand Poobah ![]() ![]() Joined: June-29-2005 Location: NWCT Status: Online Points: 21141 |
![]() ![]() ![]() ![]() ![]() |
Another reason to turn that observer seat around the way it's supposed to be! The pylon is a sturdier grab handle too. ![]() |
|
![]() |
Post Reply ![]() |
Page <1234> |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |