1968 barracuda rudder |
Post Reply |
Author | |
Barracuda
Moderator Group Joined: November-17-2003 Location: United States Status: Offline Points: 998 |
Post Options
Thanks(0)
Posted: November-04-2005 at 5:09pm |
I'm selling a brand new rudder port that accepts a 1 inch shaft- let me know if you need one.
|
|
barr 68
Groupie Joined: October-21-2004 Location: United States Status: Offline Points: 59 |
Post Options
Thanks(0)
|
Thanks Dave, Now that I have disassembled the ruddder and port , I see what you mean. The port on my boat was not only worn , the tube that the rudder shaft turns in was broken away from the plate that bolts to the hull. As it appears that the tube and plate were originally brazed together , I just rebrazed the joint. To fix the oversized hole in the port I cut some brass shim stock and silfossed it into the tube. I then reemed the port to size.Hopefully the fix is as good or better than new. Thanks for your help.Jim/barr 68
|
|
barr68
|
|
David F
Platinum Member Joined: June-11-2004 Location: United States Status: Offline Points: 1770 |
Post Options
Thanks(0)
|
The "bushing" is actually called the rudder port. If the port is worn, you should also inspect the rudder shaft as it is probably worn as well. There is not a replacable bushing in either part.
|
|
nautique frk
Platinum Member Joined: February-16-2004 Location: United States Status: Offline Points: 1784 |
Post Options
Thanks(0)
|
Give Woody a call at Southeast Correct Craft
He should be able to help . Good Luck !! Mike Thrower (nautique Frk) |
|
barr 68
Groupie Joined: October-21-2004 Location: United States Status: Offline Points: 59 |
Post Options
Thanks(0)
|
I need to replace the rudder bushing on my 1968 Barracuda. Are they still available from Correct Craft? Thanks Jim /Barr68
|
|
barr68
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |