Raw water pump replacement
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50767
Printed Date: April-28-2024 at 6:35pm
Topic: Raw water pump replacement
Posted By: Ryan78
Subject: Raw water pump replacement
Date Posted: July-14-2022 at 12:30pm
| Hello. I am wondering if anyone can help me. We have a 1978 ski tique that needs the plastic raw water pump housing replaced. It is a Jabsco 17410-0001. I found one and it broke in half. Unfortunately Jabsco is back ordered for 6 weeks. Does anyone know where I can find another? Any help is appreciated. Thank you |
Replies:
Posted By: KENO
Date Posted: July-14-2022 at 1:24pm
|
Are you wanting to replace the housing, or the whole pump? People have replaced the Jabsco with a Sherwood G21 type pump without much in the way of modifications or there's a DJ raw water pump that's from South Korea that's a copy of the Sherwood that would work too. I imagine since it's summer, you want something right now that'll get you on the water  Does yours mount to a stamped steel bracket like this one? If so, people cut the end of the bracket so that the Sherwood or DJ pump with a pressed on pulley can be easily installed Your Jabsco has a set screw and key holding the pulley in place so it's easy to remove from the bracket, but I figure you already know that.  |
Posted By: Ryan78
Date Posted: July-14-2022 at 3:32pm
| Thank you for the reply. I was hoping to replace just the plastic housing if possible. I just can’t seem to locate one. And yes mine is the same bracket. |