1985 Barefoot Nautique - Engine Photos
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=50036
Printed Date: April-27-2024 at 5:54pm
Topic: 1985 Barefoot Nautique - Engine Photos
Posted By: KurtA
Subject: 1985 Barefoot Nautique - Engine Photos
Date Posted: July-19-2021 at 11:47am
| I have a 1985 Barefoot Nautique which is apart and getting ready to put the engine back in. I'm wondering if anyone has pictures of their Barefoot Nautique engine bay so I can use it for reference. Unfortunately the person that took it apart did not take photos so want to help make the reassembly an easier puzzle to solve. |
Replies:
Posted By: pjsmoreno
Date Posted: July-20-2021 at 6:26am
My Ski Nautique is 1989 with a factory installed 454. It's dress up but is the same configuration. Hope this will help.....    |
Posted By: Hollywood
Date Posted: July-20-2021 at 9:09am
| Wow, nice rig there |
Posted By: KurtA
Date Posted: July-20-2021 at 9:54am
|
This is great pjsmoreno! I really appreciate it. Once we get into it I may circle back for a couple other photos in specific areas. Have a great day! ------------- 1985 Barefoot Nautique Saint Petersburg, Florida |
Posted By: pjsmoreno
Date Posted: July-20-2021 at 12:24pm
|
I was out on the lake yesterday afternoon and I remember the request for a few pics. Thanks for the comment on the engine. Was rebuilt a couple of years ago due to a failed impeller. I should have change it before summer started. Can only blame myself for that...
|
Posted By: KurtA
Date Posted: July-20-2021 at 12:40pm
|
Oh wow... impeller thing is the real deal. I am religious about changing every year. If you happen to have a photo of where the oil cooler is positioned I would super appreciate it. Also, do you have a transmission cooler? I can't remember if mine was a combined cooler or not. ------------- 1985 Barefoot Nautique Saint Petersburg, Florida |
Posted By: pjsmoreno
Date Posted: July-20-2021 at 12:52pm
|
Was distracted that year with adjusting the carburetor after
a rebuild while at the boat ramp. Didn’t catch it in time. |
Posted By: pjsmoreno
Date Posted: July-20-2021 at 12:55pm
| Mine is just an transmission cooler. Will get you a better picture of it.. |
Posted By: pjsmoreno
Date Posted: July-22-2021 at 2:19pm
Here you go.....
   |
Posted By: KurtA
Date Posted: July-22-2021 at 10:27pm
|
Thank you! Very helpful! Wish me luck, engine final assembly and install starts in 2 weeks. ------------- 1985 Barefoot Nautique Saint Petersburg, Florida |
Posted By: Hollywood
Date Posted: July-22-2021 at 10:48pm
| Looks like a larger than stock tranny cooler |
Posted By: NCH20SKIER
Date Posted: July-23-2021 at 6:16am
|
Very nice ------------- '05 206 Limited '88 BFN |
Posted By: TRBenj
Date Posted: July-23-2021 at 7:54am
Nah |
Hollywood wrote:Posted By: KENO
Date Posted: July-23-2021 at 8:05am
|
I'll agree with the "nah" Looks like one of them big boy 9 inchers, for a 10-18/72C to me, not the little 5 incher on a 10-17/71C
 |
Posted By: GottaSki
Date Posted: July-23-2021 at 8:26am
|
yep
------------- "There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing." River Rat to Mole |