Print Page | Close Window

Looking for a Mentor

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49212
Printed Date: April-28-2024 at 1:05pm


Topic: Looking for a Mentor
Posted By: KingsPoint19
Subject: Looking for a Mentor
Date Posted: September-09-2020 at 7:06pm
Hi All

New to the group and just purchased a '74 Mustang with a 302.  There are some mechanical and structural issues.  I am looking for an experts on these boats and a mentor to lean on during my resto journey.  Thanks!


-------------
Best Regards,

BryceC
Acta Non Verba


Replies:
Posted By: Duane in Indy
Date Posted: September-09-2020 at 8:19pm
Welcome to the group.  You came to the right place.  Especially because you are a fellow Mustang owner.  Many on here will add helpful advice.  One in particular stands out above others.  He is knowledgeable on any subject you ask about.  He is a little on the shy side but I feel certain he will introduce himself later.  Good luck on your boat.

-------------
Keep it as original as YOU want it
        1978 Mustang (modified)

Posted By: Hollywood
Date Posted: September-09-2020 at 8:27pm
Helps to know where you’re at. This is a worldwide community. Belgrade Lakes Maine? There are active Maine members here. It’s always good to get extra eyes on the job.

Posted By: 8122pbrainard
Date Posted: September-10-2020 at 8:32am
Bryce,
I too would like to welcome you to CCfan. Your mentors are all the CCfan members. I know you will find plenty of helf here with what ever you need. Knowing some specifics would be great and pictures are always the best to show what you are working with. 


-------------
/diaries/details.asp?ID=1622" rel="nofollow -

54 Atom

/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique

64 X55 Dunphy

Keep it original, Pete
<


Print Page | Close Window