Pylon and steering wheel
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=49094
Printed Date: April-27-2024 at 2:40am
Topic: Pylon and steering wheel
Posted By: wsavini
Subject: Pylon and steering wheel
Date Posted: August-15-2020 at 9:02pm
| Looking for a pylon with the ring/finger for a 83 BN. And a steering wheel for a early 70’s CC Mustang |
Replies:
Posted By: Bigbirdmk
Date Posted: April-26-2021 at 3:53pm
|
I have a pylon with ring and finger out of a 79 Ski if your still looking. ------------- 1979 Ski Nautique Excalibur 330 repower |
Posted By: wsavini
Date Posted: April-26-2021 at 4:08pm
| I’m interested, Please send me pic? |
Posted By: Bigbirdmk
Date Posted: April-26-2021 at 5:58pm
|
I cannot figure out how to post pics on here. Do you have another method I can send them via? ------------- 1979 Ski Nautique Excalibur 330 repower |
Posted By: Bigbirdmk
Date Posted: April-26-2021 at 6:16pm
They should be visible on the classic correctcraft Facebook page. ------------- 1979 Ski Nautique Excalibur 330 repower |
wsavini wrote:Posted By: wsavini
Date Posted: April-26-2021 at 6:31pm
|
You can email me wsavini@gmail.com Or text me at 508-649-3449 |
Posted By: wsavini
Date Posted: April-27-2021 at 11:40am
| Ok I just figured it out and saw pic. That’s what I’m looking for. How much should I send you? |
Posted By: TRBenj
Date Posted: April-27-2021 at 12:35pm
| Not to throw a wrench in anyone’s sale but I’m assuming dimensions were exchanged? (The SN and BFN pylons do not generally interchange). |
Posted By: wsavini
Date Posted: April-27-2021 at 12:42pm
| Well that’s good to know. The one in my BF seems to be bigger in diameter than my sn. I’ll check it out. My BF pylon ring was cut off with a metal saw. |
Posted By: TRBenj
Date Posted: April-27-2021 at 12:56pm
|
Pylon diameter is the same for all cc’s since ‘76 (2.5”). The height is different- the critical difference between SN and BFN is the distance from the hull cup to the pylon flange (BFN is taller- a flanged SN pylon will hit the floor and never reach the hull). Ring and finger are obviously the same though- you could swap that piece over. |
Posted By: wsavini
Date Posted: April-27-2021 at 1:02pm
| I’ll measure from the bottom of the pylon to the floor plate. |
Posted By: wsavini
Date Posted: April-28-2021 at 8:16pm
| Good call! Thank you. BN is 14” from bottom to floor plate. The SN is 9”. Thank you |
Posted By: ScottZ
Date Posted: May-04-2021 at 4:35pm
|
I have a pylon out of an 88 Barefoot Nautique. It is the first year of the new design with the ball in place of the ring and finger. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: wsavini
Date Posted: May-04-2021 at 5:05pm
| Can you Pm me a price? And pic? |
Posted By: TRBenj
Date Posted: May-04-2021 at 5:37pm
|
Posted By: wsavini
Date Posted: May-10-2021 at 7:02am
| Please send me a pic and a price. Ty |
Posted By: ScottZ
Date Posted: May-10-2021 at 8:55am
|
$200 I will get a picture of it later this week. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: TRBenj
Date Posted: May-10-2021 at 9:23am
|
Not to throw another wrench but you can’t swap ring/finger pylons with ball toppers without some modifications. The hull cup is a different size- the r/f pylons had a small finger installed at the bottom (~1” diameter) that installed in a corresponding sized hull cup. The ball top pylons retain their full diameter right to the bottom and used a 2.5”+ diameter hull cup. Additionally, a 83 BFN will not have a cradle and will require a flange at the floor (and a backing plate underneath) to secure. The flanges were removed from the pylons when the cradles showed up (‘85 or 86 on the Bfn) which was a few years before the ball topper style came out (mid 87). So no ball topper will have the required flange for the boat in question. Trying to find a flanged Bfn pylon will likely prove tricky… they would have been used 79-85ish and is specific to that model. If your pylon is otherwise ok, you might be best served swapping over a ring and finger as that is a lot more common (used across all models 73-87). |
Posted By: wsavini
Date Posted: May-10-2021 at 9:27am
| Man I do t know what I’d do without you guys. Ty for that info. |