Print Page | Close Window

Coil and resistor questions.

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=31272
Printed Date: May-19-2024 at 5:45am


Topic: Coil and resistor questions.
Posted By: CrazyCanuck
Subject: Coil and resistor questions.
Date Posted: August-20-2013 at 8:34pm
Hi all.

I am going to pick up a ballast resistor for the SN and I need to know what resistance it should have.

I am converting back to the original points ignition thank to Hollywood sending me a nice dizzy. Since my frankenstein had an old neverspark system, I don't have a ballast resistor. Also my coil says "Electronic ignition" on the side.

Can I use that coil?
What resistor should I use?

Any help would be much appreciated.

Thanks.

Corey.


-------------
https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRtW3vJrMHLdqBzndt9VX3oOpBuRopGlzKq9Ea7pAO7wnTuoD8E8g


Print Page | Close Window