Print Page | Close Window

Engine floods after running Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=26775 Printed Date: May-28-2024 at 5:18pm Topic: Engine floods after running Posted By: baysport22 Subject: Engine floods after running Date Posted: July-02-2012 at 8:15pm just rebuilt carb engine runs great just when i shut it off gas drips into the carb so i have to hold it wide open to get it to start. there is no way to adjust the float from the outside of the carb. is there another way to fix this issue? Replies: Posted By: TRBenj Date Posted: July-02-2012 at 8:16pm Either the float is stuck or the needle/seat is buggered up... either way, youre pulling the bowl off. ------------- Posted By: MI-nick Date Posted: July-03-2012 at 12:58pm or the float is too high... ------------- As far as I can tell, I'm not quite sure...

Print Page | Close Window