gel coat questions
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1794
Printed Date: May-31-2024 at 2:26pm
Topic: gel coat questions
Posted By: raygunclan
Subject: gel coat questions
Date Posted: June-02-2005 at 7:55pm
i want to tackle the removal of the stripes (they look like decals, because of a few bubbles, but i can't imagine that a 15 inch width of decal could go on so nicely arond the boat) and in the process of checking it out, i found some cracks in the gelcoat. we plan on doing a one color job on the hull, so is there an epoxy or something similar that i could "patch" up the cracks with? i'm not really in the market to do a $1000 gel recoat on the boat, so any tips would be appreciated!
thanks!
suzanne
-------------
who needs a mortgage when you have a boat!?!?
|
Replies:
Posted By: David F
Date Posted: June-03-2005 at 1:12pm
|
If you are going to paint the hull, then simply grind out the cracks down to the fiberglass and then fill/smooth with Bondo to the original surface and shape of the hull.
|
|