Removing 80’s SN windscreen
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=1179
Printed Date: May-24-2024 at 4:44am
Topic: Removing 80’s SN windscreen
Posted By: markb
Subject: Removing 80’s SN windscreen
Date Posted: February-05-2005 at 9:38pm
Hi there,
I am wondering if removing an 80's SN windscreen is going to be a drama? I am about to import one to Australia and frieght is in cubic metres.
Temporarliy removing the windscreen will save lots of $$$ on shipping as saves about 11 cbm.
So what's the procedure for this? is the winscreen rivetted or screwed down?
Thanks
Mark
|
Replies:
Posted By: 882001
Date Posted: February-06-2005 at 2:33am
it looks really easy and it is all flat glass so if it gets broken, no big deal
-------------
kemah texas
http://www.correctcraftfan.com/diaries/details.asp?ID=163&yrstart=1986&yrend=1990 - 1988
skinautique "2001"
|
Posted By: David F
Date Posted: February-06-2005 at 11:55am
|
The glass is probably anchored in place with "T" bolts. Crawl under the dash and look for all the nuts and washers directly below the windshield. Remove the nuts and pull the windshield straight up. At least that is the way my '77 windsheild is attached. The windshield on my '93 is attached from the top with screws hidden behind a cover.
|
Posted By: markb
Date Posted: February-06-2005 at 5:50pm
Thanks for that,
So by the sound of it, it's a relatively easy job that will save me over $1K.
oh well on to the next step then.
|
|