Boats For Sale:
removing rear grab rail '95 SN |
Post Reply 
|
| Author | |
Jonny Quest 
Grand Poobah 
Joined: August-20-2013 Location: Utah--via Texas Status: Offline Points: 3032 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: removing rear grab rail '95 SNPosted: April-08-2023 at 10:19pm |
|
Very nice. Gonna have a new boat soon...
|
|
|
Current
2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
|
 |
|
|
LooseScrew22
Groupie 
Joined: August-05-2022 Location: Oregon Status: Offline Points: 54 |
Post Options
Thanks(0)
Quote Reply
Posted: April-08-2023 at 10:10pm |
|
Got the rail powder-coated and back on the boat... looks like new!
 |
|
|
|
|
LooseScrew22
Groupie
Joined: August-05-2022 Location: Oregon Status: Offline Points: 54 |
Post Options
Thanks(0)
Quote Reply
Posted: March-28-2023 at 7:34am |
|
A quick update- i blasted the original coating off and had the rail powder coated. Not sure what gloss level was factory but this has the sheen of electrical tape- It looks fantastic. I'll update with fotos when i get it back on the boat.
|
|
|
|
|
LooseScrew22
Groupie
Joined: August-05-2022 Location: Oregon Status: Offline Points: 54 |
Post Options
Thanks(0)
Quote Reply
Posted: March-16-2023 at 2:12pm |
|
so a little tappy tap tap and i got it out. However, I cant tell if the grab rail is painted/coated or powder coated. I can't get the image uploader to work so i shared the g-drive link.
https://drive.google.com/file/d/1r2jHYHF0-ZP6tvCXNa8WICGJGSuyNbVc/view? usp=sharinghttp://https://drive.google.com/file/d/1r2jHYHF0-ZP6tvCXNa8WICGJGSuyNbVc/view?usp=sharing Any ideas on how best to remove the coating to prep for powder coat?
|
|
|
|
|
LooseScrew22
Groupie
Joined: August-05-2022 Location: Oregon Status: Offline Points: 54 |
Post Options
Thanks(0)
Quote Reply
Posted: March-13-2023 at 11:55am |
|
yes, thats exactly what mine looks like... but half the finish is gone. i will gently apply some love taps and see if i can remove it. i haven't removed the fuel tank yet...but may need to to replace the hoses/gaskets anyways.
I can't really tell if the grab rail is painted/coated or powder coated as it looks shiny underneath. My plan is to have it powdercoated in flat black once i get it out. Thanks for the info |
|
|
|
|
KENO
Grand Poobah
Joined: June-06-2004 Location: United States Status: Offline Points: 11269 |
Post Options
Thanks(0)
Quote Reply
Posted: March-13-2023 at 8:22am |
|
It must look like this
 Last time I took one off , it was from a Sport Nautique, same vintage and some love taps from inside got it out pretty easily. The gas tank was out so there was some good room to swing a hammer. You could also probably cut some wedges and use them to loosen things up if you don't have good access from the inside |
|
|
|
|
LooseScrew22
Groupie
Joined: August-05-2022 Location: Oregon Status: Offline Points: 54 |
Post Options
Thanks(0)
Quote Reply
Posted: March-11-2023 at 6:50pm |
|
I need some advice removing the rear grab rail on my '95 SN- it's in a sorry need for powdercoating but i can't get it to budge. I removed the 3 nuts that i thought were holding it to the rear of the boat. I don't want to aply too much pressure in case that might crack the fiberglass- any tips or ideas how to remove safely?
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options