GT - 40 distributor |
Post Reply ![]() |
Author | |
waterwrench ![]() Groupie ![]() Joined: July-16-2014 Location: iowa Status: Offline Points: 57 |
![]() ![]() ![]() ![]() ![]() Posted: April-21-2025 at 2:23pm |
Looking for distributor and ignition module for my 98 ski. It has the pro boss gt-40 multi- port fuel injection. My old one didnt fair so well when the boat went thru the dam.
|
|
![]() |
|
KENO ![]() Grand Poobah ![]() Joined: June-06-2004 Location: United States Status: Offline Points: 11275 |
![]() ![]() ![]() ![]() ![]() |
Are you looking for used, rebuilt or new?
Rebuilt can be found at most car part stores. One example is a Cardone 30-2891. It's a distributor for a 94 F-150 with a 351w with a cast iron gear on it. You can find lots of new Chinese made units for a 94 F-150 with a 351w at cheap prices. Numerous people around here have used them with good results. An example of this would be a Spectra FD-14 You need to get one with a cast iron gear not a steel gear The distributor bodies are the same on the marine and automotive units. The caps on the original gt40 distributors were not vented, The caps these days have a vent on the top and the "marine cap" has the vent filled with RTV so that it's not vented any more. Numerous people have filled their vent or if their old cap was unvented and in good shape reused that on their new distributor NAPA has the rebuilt and new distributors. You can also find a brand new distributor from PCM or one of the Chinese ones at nautiqueparts or SkiDim Just remember.......you want a cast iron gear, not a steel gear with whatever route you take. ![]() Ignition modules.......that'll be another reply later Here's a recent thread in the link with some info You'll find a huge range of prices from 60 ish buck up to 585 bucks before any discounts, shipping charges etc so that's your choice depending on what your wallet thinks |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |