U-bolts for hoop-style bow stop
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48017
Printed Date: May-05-2024 at 6:10pm
Topic: U-bolts for hoop-style bow stop
Posted By: MourningWood
Subject: U-bolts for hoop-style bow stop
Date Posted: September-06-2019 at 11:05pm
Need 3 un-bent, un-frozen-solid-by-rust bow stop hold down u-bolts.
They have been tough to find new so far...thanks
-------------
1994 Ski Nautique "Riot"
1964 Dunphy X-55 "One 'N Dun"
'I measured twice, cut three times, and it's still too short!"
|
Replies:
Posted By: 8122pbrainard
Date Posted: September-07-2019 at 7:10am
Brian,
https://www.mcmaster.com/u-bolts" rel="nofollow - Have you looked at McMaster?
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: zwoobah
Date Posted: September-08-2019 at 2:58am
I just picked up four new ones at Tractor Supply. $5,69 each, 3"x6.5" or so and included plates and nuts.
-------------
1968 Mustang 16 - 351W powered
|
Posted By: MourningWood
Date Posted: September-08-2019 at 3:57pm
Thank you!
I'll go there tomorrow.
-------------
1994 Ski Nautique "Riot"
1964 Dunphy X-55 "One 'N Dun"
'I measured twice, cut three times, and it's still too short!"
|
Posted By: zwoobah
Date Posted: October-07-2019 at 7:06pm
Update: The cross-plates for the tractor supply u-bolts are crap. I loaded my boat on the trailer yesterday and all four of them bent. Plan to get thicker 3" wide plates, or just order a stronger setup online.
-------------
1968 Mustang 16 - 351W powered
|
|