Holley carb dumping fuel at idle on one side
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47954
Printed Date: April-28-2024 at 3:51pm
Topic: Holley carb dumping fuel at idle on one side
Posted By: Crmaverick
Subject: Holley carb dumping fuel at idle on one side
Date Posted: August-24-2019 at 9:53pm
|
Had the boat out today it’s running good, accept at idle after warming up it stalls out and then starts hard. Fuel is dumping in at idle on one side of the primaries. I’ve gone through the whole carb with a Holley rebuild kit. The float is new, needle/seats, and power valve. Accelerator pumps are new and adjusted. Float heights are now set right, attached video below anyone know what I can check to fix this fuel dumping problem? https://drive.google.com/file/d/1dUk6Y8vb0Hglj5w_uaSAco3BF2PqdJLg/view?usp=drivesdk" rel="nofollow - https://drive.google.com/file/d/1dUk6Y8vb0Hglj5w_uaSAco3BF2PqdJLg/view?usp=drivesdk |
Replies:
Posted By: KENO
Date Posted: August-24-2019 at 10:55pm
|
You've got mail The G mail type  What size needle and seat assemblies do you have in it? |
Posted By: Crmaverick
Date Posted: August-24-2019 at 11:18pm
.120. It was doing the same thing with a .110 and .101, so I guess I can rule that out |
KENO wrote: