Ski Pylon wanted
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47868
Printed Date: April-28-2024 at 8:34pm
Topic: Ski Pylon wanted
Posted By: blueridgespeed
Subject: Ski Pylon wanted
Date Posted: August-05-2019 at 11:36am
|
So, I'll be doing some work to install whatever pylon I can find (or make). I have a 1979 Southwind 20 The "hole in the floor" is there (patched with plywood) and a sump is currently occupying the bilge-front "socket" in the keel. I would consider a "skylon" type of taller pylon as well - understanding that these types require a set of support lines to a bow-ring strap or similar. Located in NC zip 28701 |
Replies:
Posted By: NCH20SKIER
Date Posted: August-05-2019 at 12:15pm
|
If you are looking for a ring and finger pylon I have one Located on Badin Lake Zip 28127 ------------- '05 206 Limited '88 BFN |
Posted By: Hollywood
Date Posted: August-05-2019 at 12:39pm
|
Southwind pylon will likely be a little tougher to find. The floor is further from the hull, influencing where the bend is. |
Posted By: blueridgespeed
Date Posted: August-07-2019 at 3:19pm
|
Thank you - and thank you Hollywood. If we can measure the available pylon - I can measure my boat. The Southwind has a taller freeboard - the Barefoot somewhat shorter, and then most nautiques even shorter - by appearances. It follows that the floor-to-hull keel distances correspond. Hollywood - I did not realize the pylons had a "bend" Are you referring to the area of taper from a larger diameter down to a slightly narrower diameter at the base of the ring? |
Posted By: Gary S
Date Posted: August-07-2019 at 4:53pm
Stolen picture from TRBenj showing pylon bends- ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |