general
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41769
Printed Date: May-04-2024 at 6:47am
Topic: general
Posted By: sinkingslow
Subject: general
Date Posted: August-17-2017 at 12:33pm
| New member, just purchased a 20' Southwind project.Will be looking for parts. |
Replies:
Posted By: Hollywood
Date Posted: August-17-2017 at 1:20pm
| JDD33 junked one as did myself. Mine didn't have a lot of useful stuff but if you need something specific just ask. |
Posted By: sinkingslow
Date Posted: August-17-2017 at 1:37pm
| Thanks for the reply,I'm not yet looking for anything pacific .Its a project that will be on hold untill I complete a restoration on a 1968 Mustang(car). |
Posted By: KENO
Date Posted: August-17-2017 at 1:40pm
One of my favorite pictures from Hollywood's boat (or 2) junking evolution 
|
Posted By: sinkingslow
Date Posted: August-22-2017 at 6:30pm
| The only parts I would want to buy now would be,window brace and bow light for my 75 20' southwind. Thanks Dave |
Posted By: Hollywood
Date Posted: August-22-2017 at 7:21pm
| ^^ The Southwind is on the bottom. It was a 1975 open bow 20'. I have the entire windshield and there braces at the walk through. If they weren't mangled and looked original I'm sure I kept them. I will check for the bow light as well. None of the brightwork was that great though, lots of sun, pitting... |
Posted By: JDD33
Date Posted: August-23-2017 at 12:51am
|
Yep! I have the complete windshield a bunch of teakand a few other accessories left. Give a shout as to what you might need. ------------- Old school goin back to school! |
Posted By: sinkingslow
Date Posted: August-23-2017 at 10:52pm
| What teak do you have? strips our complete piece? Would you sell 1 windshield brace? do you have any step pads? I'm not going to restore it to original,so I'll just go with an after-market bow light.I'm thinking its going to be more of a hot rod.I'm going to redo and reinforce the stringers and I have my eye on a 400hp small block chevy block.It now has a 225hp chevy. would that be a 307cu.in do you know? |