Perfect Pass Question
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39982
Printed Date: April-28-2024 at 6:47pm
Topic: Perfect Pass Question
Posted By: fgroce
Subject: Perfect Pass Question
Date Posted: September-26-2016 at 9:45pm
I have a 2002 Ski Nautique with the Perfect Pass system program 6.3. When you set the speed to 30 and accelerate the boat for a run, the Perfect Pass will sometimes start shedding power long before we get to setpoint. Then it will eventually get close to set point about 1 to 2 mph off. We are in the Slalom mode, still reading the book and learning the system. The digital mph does read speed, but I am also having trouble with the Farnia gauge upgrade, the speedometer only goes up to about 25 or so max. Any ideas where to start? I did reseat all the connectors on the perfect pass controller, no change.
-------------
FGroce
88 Ski Nautique
For 28 years
Now 2002 Ski Nautique
|
Replies:
Posted By: RLW
Date Posted: September-26-2016 at 11:28pm
give Mark a call at perfect pass 1-902-468-2150
-------------
skinxs
|
Posted By: Orlando76
Date Posted: September-27-2016 at 7:33am
Also follow the trouble shoot videos on their website. Does the PP have a paddlwheel? I think you may need to reset all your baselines. PP, especially the older non GPS models, will start out fast then slow down ~1-2 mph to its "set speed". Keeping in mind it's using RPM as its reference point so you have to tell it "32 mph is ~3250rpm"
-------------
Please support The Cystic Fibrosis Foundation
1976 Ski Nautique 351 Escort
1993 Ski Nautique purple and black 351 HO PCM
|
|