Print Page | Close Window

Sizing up a trailer Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39584 Printed Date: June-06-2024 at 3:26am Topic: Sizing up a trailer Posted By: swilliams Subject: Sizing up a trailer Date Posted: August-03-2016 at 10:34pm I just picked up a 76' Martinique but need a better, bigger trailer than the #2 that is under it. I've located an inboard trailer that may work( #3's are hard to find). What I need to know is the distance from the center of the motor to the stern. Boat is over an hour away from me so I thought I'd ask. The trailer I am looking at is 6' from the axle to the end of the bunks. I assume a little bit of the engine forward of the axle is ok but wanted to make sure. I promise to get pics up of the Martinique when I can! Thanks! Steve

Print Page | Close Window