Which way do I pull steering cable?
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38837
Printed Date: May-05-2024 at 5:49am
Topic: Which way do I pull steering cable?
Posted By: seacamper
Subject: Which way do I pull steering cable?
Date Posted: May-30-2016 at 9:42pm
|
On the 75 SN, I have a line taped to the rudder hole end, and I am trying to pull up the cable under the steering wheel. The rudder end metal will not make the bend as it comes out of the floor. I am thinking of simply cutting off the metal "yoke" and taping my line to the plastic casing, and then taping the new steering wheel end to the line. That should make all the angles work. Any inputs? (Except for the Chinese guy that posted 40 posts earlier). ------------- 1980 Ski Nautique Boat Bar 1988 Mastercraft Tristar Open Bow 1988 Mastercraft Tristar Closed Bow 1969 Seacamper Houseboat 1986 Harris Pontoon 2004 Seadoo GTX SC + Flydive Xboard 1999 Adventurecraft |
Replies:
Posted By: gun-driver
Date Posted: May-30-2016 at 10:15pm
Pull it from the end  You're pulling it the wrong way. Attach line to helm end and pull through then reverse. |
Posted By: seacamper
Date Posted: May-31-2016 at 12:12am
Ahhhhhhh. I will try that tomorrow. ------------- 1980 Ski Nautique Boat Bar 1988 Mastercraft Tristar Open Bow 1988 Mastercraft Tristar Closed Bow 1969 Seacamper Houseboat 1986 Harris Pontoon 2004 Seadoo GTX SC + Flydive Xboard 1999 Adventurecraft |
gun-driver wrote:Posted By: Hollywood
Date Posted: May-31-2016 at 11:26am
| good news that boat needed one bad |