80 Ski Nautique Parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=36066
Printed Date: May-09-2024 at 5:18pm
Topic: 80 Ski Nautique Parts
Posted By: 1980nautique
Subject: 80 Ski Nautique Parts
Date Posted: May-16-2015 at 1:04pm
|
Parting out 1980 Ski Nautique only Parts Left: as of 8/18/16 Ski Pylon NO Ring and Finger Mufflers Thru-Hull Exhaust Outlets |
Replies:
Posted By: 1980nautique
Date Posted: May-16-2015 at 1:35pm
|
Few additions to above 80 parts list: Cradle and Ski Pylon Rear Bilge Blower collector box Swim platform brackets set of three (Brackets only) Platform Sold |
Posted By: Orlando76
Date Posted: May-16-2015 at 4:50pm
| How much for pitot and tube? |
Posted By: TRBenj
Date Posted: May-16-2015 at 4:54pm
|
Email my cousin about the gauges: moneycash@gmail.com DrStevens is looking for the dash emblem. |
Posted By: 1980nautique
Date Posted: May-16-2015 at 6:36pm
|
Hi TRBenj Sent PM's to both Thanks |
Posted By: seacamper
Date Posted: May-17-2015 at 11:32am
|
Hello, Can you PM me about the prop shaft ? Thanks, Tom ------------- 1980 Ski Nautique Boat Bar 1988 Mastercraft Tristar Open Bow 1988 Mastercraft Tristar Closed Bow 1969 Seacamper Houseboat 1986 Harris Pontoon 2004 Seadoo GTX SC + Flydive Xboard 1999 Adventurecraft |
Posted By: 1980nautique
Date Posted: June-07-2015 at 9:26am
| Swim Platform Sold |
Posted By: 1980nautique
Date Posted: June-07-2015 at 9:30am
|
PM me with offer for Pitot and balance tube. |
Posted By: cueball
Date Posted: June-07-2015 at 10:01pm
|
Do you have a glovebox/dash tray? ------------- Shawn 1986 SN 2001 |
Posted By: 1980nautique
Date Posted: June-08-2015 at 9:58am
| 1980 no glove box |
Posted By: scootdogydog
Date Posted: June-08-2015 at 11:33am
|
Cueball, I bought a glovebox to replace the tray in my 86. Before installing it, I sold the 86. Got it from Christine's. Pm me and we'll talk. I'm traveling this week so might be a little delay. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=7183" rel="nofollow - 1999 Python 1980 Ski Tique 1968 Mustang WIP |
Posted By: 1980nautique
Date Posted: June-18-2015 at 2:34pm
|
|
Posted By: Mojo
Date Posted: June-18-2015 at 3:50pm
|
I'll take the side emblems. Drop me a PM on price etc. Thanks Moj' ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: 1980nautique
Date Posted: June-18-2015 at 4:05pm
| PM sent |
Posted By: shierh
Date Posted: June-18-2015 at 5:21pm
| what do you want for the speedo's |
Posted By: 80tiquefan
Date Posted: June-18-2015 at 9:23pm
|
PM me with what u want for the bow scoop step plate and the hull step plates. ------------- Jason Murray http://www.correctcraftfan.com/diaries/details.asp?ID=4217" rel="nofollow - 1980SkiNautique 1993 Sport Nautique |
Posted By: mzajac
Date Posted: June-18-2015 at 9:33pm
| I need the ski pylon. I have a 74 Martiniqe |
Posted By: 1980nautique
Date Posted: June-19-2015 at 12:28pm
| PM Sent |
Posted By: 1980nautique
Date Posted: June-19-2015 at 12:35pm
| PM me with offer for Ring and Fingerless Pylon!!! |
Posted By: mzajac
Date Posted: June-19-2015 at 7:41pm
| $90 Can you send a pic |
Posted By: 1980nautique
Date Posted: June-20-2015 at 11:02am
|
mzajac, PM Sent |
Posted By: LONGBRAID
Date Posted: June-27-2015 at 4:05am
| DO YOU STILL HAVE THE AIRGUIDE SPEEDOMETERS |
Posted By: LONGBRAID
Date Posted: June-27-2015 at 4:10am
| I HAVE A 1979 SKI NAUTIQUE , NEED GAUGES AND WINDSHIELD,AIR GUIDE SPEEDODOMETER PICKUP, CONTACT ME ,,,LONGBRAID0756@CHARTER.NET |
Posted By: soldthefarm3
Date Posted: June-28-2015 at 8:26pm
|
Do you still have the rudder, ------------- Pete |
Posted By: 1980nautique
Date Posted: June-28-2015 at 8:51pm
| NO Rudder and Thru-Hull stuffing box are Sold!!! |
Posted By: 1980nautique
Date Posted: July-01-2015 at 4:14pm
| Pictures of removed and new in box parts posted above. More to come as removed!!! |
Posted By: 80tiquefan
Date Posted: July-05-2015 at 2:53am
|
PM sent. ------------- Jason Murray http://www.correctcraftfan.com/diaries/details.asp?ID=4217" rel="nofollow - 1980SkiNautique 1993 Sport Nautique |
Posted By: 93/70 ccpb
Date Posted: July-05-2015 at 3:02pm
|
just sent a pm about engine cradle. ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: Joby1969
Date Posted: July-06-2015 at 12:34am
|
Hello, I am very interested in several parts. Unfortunately I live in Orlando. Please email me at josephgaeta1969@gmail.com. Please let me know what parts you have left. I may be able to work something out to get the parts. My cell is 407-558-5849. Thanks, Joby |
Posted By: 1980nautique
Date Posted: July-09-2015 at 8:45pm
|
Update on parts left for sale as of 9/13/2015 Cradle Tow Pylon Mufflers Thru-Hull Exhaust |
Posted By: DrCC
Date Posted: July-09-2015 at 11:26pm
| How much for the AFX slot track ? |
Posted By: DrStevens
Date Posted: July-10-2015 at 12:21am
| Ken, I got my dash script. Thanks so much, payment sent! I really appreciate it, CCF is terrific, Thanks also to TRbenj for your help. Steve. |
Posted By: 1980nautique
Date Posted: July-10-2015 at 2:18pm
4 Lane Built on a Grass Carpeted 4' X 8' Sheet of plywood with high bank end and road course at the other Taking up Room in the basement. Wife says "Everything needs to Go" Make an offer!!! |
DrCC wrote:Posted By: 1980nautique
Date Posted: July-10-2015 at 10:49pm
You are welcome Steve!!! I am happy that it worked out for you. Thanks for being patient!!! |
Posted By: ski tique 80
Date Posted: July-14-2015 at 3:53pm
| Do u still have all the gauges , speedometer and tach gauge? Do u also have the exhaust header/mufflers and the trailer. If so how much do u want for them and will u send some pics? |
Posted By: 1980nautique
Date Posted: July-14-2015 at 6:44pm
|
IMG]uploads/13326/2015-06-13_15.13.1.jpg[/IMG] |
Posted By: Old skier
Date Posted: July-15-2015 at 12:32am
| Do you still have the shifter? |
Posted By: 1980nautique
Date Posted: July-15-2015 at 8:46pm
|
The Shifter is not an MV1 Morse Single Lever Control. it is a double Binnacle lever contraption out of an early Inboard, sailboat or some other rig!! . |
Posted By: 8122pbrainard
Date Posted: July-15-2015 at 9:39pm
The Shifter is not an MV1 Morse Single Lever Control. As you may notice in the picture, it is a double Binnacle lever contraption out of an early Inboard sailboat or some other rig!! Make an offer everything off the boat is for sale [/QUOTE] The helm control may be an old Teleflex. They made them top or side mount. Why was it installed in the 80? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: TRBenj
Date Posted: July-15-2015 at 9:47pm
| He'd need to ask the owner (at least) thrice removed on that one Pete. |
Posted By: 1980nautique
Date Posted: July-15-2015 at 10:06pm
| Pete, Tim Have any use for it???? Tim, would you like it back with the steering wheel ? |
Posted By: 79SNT351
Date Posted: July-15-2015 at 11:20pm
| Do you have the rear lift ring. |
Posted By: Old skier
Date Posted: July-15-2015 at 11:39pm
| Thanks for the picture. That is not the Morse control that I am looking for. I appreciat the help. |
Posted By: 1980nautique
Date Posted: July-16-2015 at 11:05am
I still have rear Lift Ring!! PM an offer!! |
Posted By: brteep
Date Posted: July-16-2015 at 11:03pm
|
I am interested in the driver seat frames ------------- 1979 Ski Nautique 1997 Mastercraft Prostar 205 |
Posted By: 1980nautique
Date Posted: July-18-2015 at 11:56am
PM with an offer for the Seat Frames |
Posted By: 1980nautique
Date Posted: July-20-2015 at 11:04pm
|
1980 Ski Nautique Parts That are Still Available as of 9/09/2015 Cradle Pylon Mufflers Exhaust Thru Hulls |
Posted By: nelson1j
Date Posted: July-21-2015 at 5:27am
|
Hi I am interested in the prop, have you got a picture, is it RH, as I need it for a nautique 2001. Also would you ship to the UK, can pay via paypal. Thanks James |
Posted By: 1980nautique
Date Posted: July-21-2015 at 9:01am
Yes it is RH!! PM with offer, Shipping Cost could be good for a head rush though!!!! |
Posted By: northcoastidol
Date Posted: July-29-2015 at 8:27am
|
Do you have the horns still, and the Amp gauge if sold separate? ------------- Always be ready for a run, the water does not wait for you! |
Posted By: 1980nautique
Date Posted: July-29-2015 at 8:57am
Horns for those years are still available. They are AFI Mini Twins. E-Bay and other sources have them for around $40 |
Posted By: soldthefarm3
Date Posted: July-29-2015 at 10:15pm
|
can you give me a price on the Exhaust Thru-Hulls and shipping to 60450 Thanks ------------- Pete |
Posted By: sberard5
Date Posted: August-04-2015 at 2:00pm
| Sent you a private message in hopes you still have the voltmeter for sale. Let me know... |
Posted By: 1980nautique
Date Posted: August-12-2015 at 1:24pm
| I still have the gauges but need to check function!! |
Posted By: 93/70 ccpb
Date Posted: August-22-2015 at 1:31pm
|
need measurements of cradle.lenght. width outer to outer and inner to inner rails .do not need pylon(just cradle)trying to fit it a 69 cuda ss ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: 1980nautique
Date Posted: August-29-2015 at 2:29pm
|
Dan Width across top of rails is 24 1/16" Width inside rail to inside rail is 20 5/8" Overall length front to rear is 50 1/16"     |
Posted By: 1980nautique
Date Posted: August-29-2015 at 2:38pm
Sorry sberard5 but after checking them, all gauges now rest in peace in the recycle bin at the transfer station!!! |
Posted By: JBoland
Date Posted: September-03-2015 at 9:03am
|
It sounds like as far as underwater gear goes, you only have the prop, shaft and strut remaining? Will you send me a price shipped to 30506? Thanks |
Posted By: Darkwing420
Date Posted: September-07-2015 at 1:26pm
| I just bought an 81 is there supposed to be some kind of small extension for ski pylon??and if so do you have it |
Posted By: 1980nautique
Date Posted: September-07-2015 at 3:59pm
Post a picture of what your Pylon looks like!! Sounds like someone removed the Ring and Finger!!! Does the top of your pylon look like this? 
|
Posted By: 1980nautique
Date Posted: September-09-2015 at 5:33pm
|
UPDATE Only parts left to the 80 Ski Nautique are: Engine Cradle Ski Pylon Mufflers Thru-Hull Exhaust Outlets |
Posted By: Hairdog
Date Posted: September-09-2015 at 8:01pm
| Just seeing if you have the ski pylon still? if so how much? Thanks |
Posted By: 1980nautique
Date Posted: September-10-2015 at 12:04pm
| I have it PM Sent |
Posted By: Trader144
Date Posted: September-24-2015 at 9:22pm
|
How much for the mufflers? What is the condition, hole size and length ? David |
Posted By: Trader144
Date Posted: September-24-2015 at 9:22pm
|
How much for the mufflers? What is the condition, hole size and length ? David |
Posted By: 1980nautique
Date Posted: September-25-2015 at 11:24am
PM Sent |
Posted By: 1980nautique
Date Posted: October-28-2015 at 10:01pm
|
Parts left to the 80 Ski Nautique are: Engine Cradle Ski Pylon Mufflers Thru-Hull Exhaust Outlets |