92 pro tec ignition system
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=34153
Printed Date: May-07-2024 at 5:31pm
Topic: 92 pro tec ignition system
Posted By: adolesents
Subject: 92 pro tec ignition system
Date Posted: July-15-2014 at 7:49pm
|
I just removed the entire pro tec system from my boat worked good but needed to change the system due to a high overlap cam and high compression setting off the knock sensor
|
Replies:
Posted By: adolesents
Date Posted: July-29-2014 at 6:23pm
|
Asking 150 bucks for everything
|
Posted By: adolesents
Date Posted: August-28-2014 at 2:00pm
|
100 bucks obo get this stuff outta my garage!!
|
Posted By: michiel200
Date Posted: August-31-2014 at 9:44am
Do you ship to Amsterdam, The Netherlands?
-------------
'92 BFN
|
Posted By: adolesents
Date Posted: September-30-2014 at 4:05am
|
75 bucks obo!! You can't but almost any part for that
|
Posted By: TRBenj
Date Posted: September-30-2014 at 8:01am
|
These things are a ticking time bomb... Not necessarily worth replacing until they start causing problems, but it seems it's only a matter of time. With the reasonable cost of upgrading to a conventional distributor, I'm not surprised you're having a hard time selling. We've seen many protec systems given away for free.
|
Posted By: Air206
Date Posted: September-30-2014 at 10:40am
I picked 2 up..... one was free and the other as $20 with cam.... both had cracked housings and only one worked..... they are ticking time bombs on the parts shelf too..... You don't say if it's for a 351 or 454. I might take another chance on a 454 pro-tec....
-------------
https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206
http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot
78 SkiTiq
|
Posted By: adolesents
Date Posted: September-30-2014 at 3:09pm
|
True Ok how about 50 bucks obo and it fits a 351
|
|