351 commander silinoid help
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3083
Printed Date: May-17-2024 at 4:29pm
Topic: 351 commander silinoid help
Posted By: Gregory
Subject: 351 commander silinoid help
Date Posted: February-22-2006 at 9:17pm
Hello everyone
I have an 84 SN in the fix up stage. I bought the boat with a missing observer seat,missing commander exhaust manifold elbos,and a missing starter silinoid. I bought new pcm maiffolds as well as a new marine silinoid.
HERE LIES THE PROBLEM. I am not sure where the wires go on the new silinoid. Can someone with the commander 351 take a look and help me out. I have a heavy guage RED that comes off the breaker. A heavy guage ORANGE that comes out of the harness. A lite weight RED that comes out of the harness. and a lite wieght YELLOW with a RED stripe that comes from the Tranny (neutral safety switch I assume). The Cables from the Battery and Starter are missing but thats no biggie. I dont want to guess and fry something. All the wiring diag I have looked at are no help as the color code is diff. I am sure this is stock wiring. Any help would be greatly appreciated.
|
Replies:
Posted By: 80Nautique
Date Posted: June-25-2007 at 1:56am
Greg, did you figure this one out yet? I have a 80SN 351W Ford marinized by Commander as well. I know it's been quite a while since you posted this ; just wondered if you still need help. Chris.
-------------
1980 Ski Nautique , Ford 351W Commander, BW Velvet Drive 1:1
Dayton Ohio
|
|