Print Page | Close Window

Restoring Bow Rails Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=2876 Printed Date: June-11-2024 at 3:37am Topic: Restoring Bow Rails Posted By: G Stonicher Subject: Restoring Bow Rails Date Posted: January-13-2006 at 12:16pm I am restoring a 1984 Southwind O/B and the Bow (grab) rails really need some help. I have tried buffing them, even tried steelwool not much improvement at all. They appear to be aluminum. If anyone has had any luck bringing some back to life I would appreciate some direction. Thanks, Gary ------------- 20' Southwind Replies: Posted By: G Stonicher Date Posted: January-23-2006 at 1:22pm After much trial and error I tried Mothers Aluminum Polish with a 120 grit 3m sanding pad and the rails came out great. ------------- 20' Southwind Posted By: nautique frk Date Posted: January-24-2006 at 8:14pm Have them re anodized , then put them back on , good as new !! Mike

Print Page | Close Window