Parts I have for sale.
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=15891
Printed Date: June-08-2024 at 1:14am
Topic: Parts I have for sale.
Posted By: Pgaboeing
Subject: Parts I have for sale.
Date Posted: November-24-2009 at 12:39am
|
Almost everything is sold I will work on a modified list and post it. 
|
Replies:
Posted By: Fl Inboards
Date Posted: November-24-2009 at 1:12am
|
WOW!!
I did not see it on the list but by chance rubrail end caps?? ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: behindpropeller
Date Posted: November-24-2009 at 1:21am
|
I'm looking for a set of removable swim platform brackets.
Tim ------------- |
Posted By: Waldo
Date Posted: November-24-2009 at 1:28am
|
I think Eric Lavine wanted one of the hulls.
Waldo |
Posted By: Chopper
Date Posted: November-24-2009 at 3:01am
|
Hey Paul,
As discussed, I'm keen on the complete dash assembly & gauges, Steering wheel, hand throttle control. Cheers, Andrew. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski |
Posted By: lfskizzer
Date Posted: November-24-2009 at 11:08am
|
Hey Paul,
Back in September or sometime I emailed you about the white faced gauges. I need hour meter, oil pressure, water temp, volt, fuel gauge, tachometer. Also i think i asked about drivers seat itself, the base is good and i already replaced my slides on it. Just have a huge crack in the plastic mold on the bottom so my seat rocks back and forth. Thanks ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=4457 - 2008 Ski Nautique 206 http://www.correctcraftfan.com/diaries/details.asp?ID=2683 - 1985 Ski Nautique 2001 Series |
Posted By: TRBenj
Date Posted: November-24-2009 at 11:39am
|
Paul, Im interested in the following parts:
Engine Cradle Carpet Trim Battery Box cover I also know people looking for trailers. I'll shoot you an email. ------------- |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:23pm
|
End Caps Yes I have them $10.00 + shipping, Send ur contact info Eric they are yours.
Paul |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:27pm
|
Tim
I have removable swim platform brackets with all stainless hardware. I will get you a price and photos. I actually have an extra set of base brackets that bolt to the hull (Brand New) also. Tim email contact info. Paul |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:28pm
| Eric you can have one or both hulls. |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:29pm
|
Andrew Yes I am holding all that for you.
Paul |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:35pm
|
I would like to sell the whole interior as one package. $800.00
I have one Speedo(NIB) $150.00 1 Hour Meter 1 Temp gauge - Water Tmp 1 Clock Free I have to look and see what other gauges I have. Paul Email me you contact info. Pgaski@hotmail.com |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 1:38pm
|
TRBenj,
I have 2 Engine cradles I will get photos I will also put you down for Carpet trim and Battery Box cover. Paul |
Posted By: TRBenj
Date Posted: November-24-2009 at 1:44pm
|
Paul, sounds good- feel free to email the pics (TRBenj@gmail.com). I may take both cradles, depending on the price. ------------- |
Posted By: Fl Inboards
Date Posted: November-24-2009 at 2:31pm
Hi Paul, Its Jody that was looking for the end caps. floridainboards@msn.com Where do I send the money and can you use paypal? Thanks Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Pgaboeing wrote:Posted By: behindpropeller
Date Posted: November-24-2009 at 2:38pm
Paul- tim.cochrane@gmail.com I also need the front lifting ring and the small pylon that is on the back of the boat. Tim ------------- |
Posted By: jeclarke
Date Posted: November-24-2009 at 2:55pm
| Where is the gt40 engine located? |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 3:01pm
|
Plymouth, MI, I could do some driving or box it for shipping if you are serious.
Paul |
Posted By: Pgaboeing
Date Posted: November-24-2009 at 3:03pm
|
Sorry Jody, Yes they are yours and I'm looking into setting up a paypal account.
When I get home I will check into shipping cost and get back to you. Paul |
Posted By: Fl Inboards
Date Posted: November-24-2009 at 3:05pm
|
[QUOTE=Pgaboeing] Sorry Jody, Yes they are yours and I'm looking into setting up a paypal account.
When I get home I will check into shipping cost and get back to you. Paul[/QUOTE Paul, Great, thank you! Jody ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: nate44
Date Posted: November-29-2009 at 9:58pm
|
I would be interested in a rear lifting ring assembly. cost for item/shipping?
thanks nate |
Posted By: eric lavine
Date Posted: November-30-2009 at 11:51am
|
Paul, how close are you to Toledo? ------------- "the things you own will start to own you" |
Posted By: behindpropeller
Date Posted: November-30-2009 at 11:59am
He is just outside of detroit, about 1.5 hours. Tim ------------- |
Posted By: Pgaboeing
Date Posted: November-30-2009 at 12:20pm
| I'm In Plymouth, MI 48170 Toledo is only about 1hr. away. |
Posted By: 82 Nautique 1
Date Posted: November-30-2009 at 6:19pm
|
is the Motor/Tranny still for sale ?
email me @ dhbwg@mchsi.com Thanks ------------- Original Owner " Dennis" http://www.correctcraftfan.com/diaries/details.asp?ID=4855" rel="nofollow - 1982 Nautique |
Posted By: Mojo
Date Posted: November-30-2009 at 6:59pm
|
Paul,
I dropped you a line about the trailers. If you can send me some pics, that would be great.. Moj' d.dorsen@worldnet.att.net ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: Pgaboeing
Date Posted: November-30-2009 at 8:04pm
|
Dennis I sent you an email with contact info. Yes the engine is still avail.
Paul |
Posted By: Pgaboeing
Date Posted: November-30-2009 at 8:05pm
|
Mojo, I just sent pictures of both to your email.
Paul |
Posted By: gcll
Date Posted: November-30-2009 at 10:50pm
| I would like the hour meter, fuel separator, and stern grab handle- what kind of deal will you make me on these parts |
Posted By: Pgaboeing
Date Posted: December-02-2009 at 1:50am
|
gcll, I am out of town until friday. I will get back to you this weekend
Paul |
Posted By: quinner
Date Posted: December-02-2009 at 10:48am
|
Need the seat bottom that screws to the floor.
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |
Posted By: gcll
Date Posted: December-02-2009 at 10:15pm
| No rush, thank you |
Posted By: eric lavine
Date Posted: December-05-2009 at 2:01pm
|
PG, you have any pics of the hull? ------------- "the things you own will start to own you" |
Posted By: davee40
Date Posted: December-05-2009 at 3:16pm
|
hey pg you still have the rear lift ring
Dave ------------- davee40 lakeland,fl |
Posted By: Pgaboeing
Date Posted: December-05-2009 at 4:09pm
|
gcll, Email me at Pgaski@hotmail.com
Paul |
Posted By: Pgaboeing
Date Posted: December-05-2009 at 4:10pm
|
Dave Email me, how many do you need.
Paul Pgaski@hotmail.com |
Posted By: Pgaboeing
Date Posted: December-05-2009 at 4:11pm
|
Quinner, I want to sell the whole interior together.
Paul |
Posted By: Pgaboeing
Date Posted: December-05-2009 at 4:22pm
|
Eric, Send me your Email address and I will forward pictures.
Paul Pgaski@hotmail.com |
Posted By: nate44
Date Posted: December-05-2009 at 11:35pm
|
I would like 1 rear lifting ring assembly. Please give me an address to sent money to. how much for shipping?? my zipcode is 44857
thanks nate |
Posted By: Pgaboeing
Date Posted: December-06-2009 at 12:03am
|
nate44
Email me and i will send all info. Paul |
Posted By: eric lavine
Date Posted: December-06-2009 at 12:44pm
|
lavine9153@roadrunner.com thanks,
------------- "the things you own will start to own you" |
Posted By: Pgaboeing
Date Posted: December-06-2009 at 2:57pm
|
Eric, Pics Sent
Paul |
Posted By: Andy
Date Posted: December-07-2009 at 12:03am
|
Will the 92 rudder work on my 82?
Do you have one that's unground? Spridle at Comcast dot Net ------------- http://correctcraftfan.com/diaries/details.asp?ID=3721&sort=&pagenum=6&yrstart=1982&yrend=1982" rel="nofollow - My Blue 82 SOLD! |
Posted By: Pgaboeing
Date Posted: December-07-2009 at 1:04am
|
Yes I have a unground rudder along with the rudder port with zirk fitting and rudder arm. Email me and I will send pictures.
Paul Pgaski@hotmail.com |
Posted By: davee40
Date Posted: December-11-2009 at 11:21am
|
I just need one its the rear lift ring on my 79 i need to replace
Dave ------------- davee40 lakeland,fl |
Posted By: Pgaboeing
Date Posted: December-11-2009 at 4:00pm
|
Dave,
Send me an email and I will forward all of the info. $20.00 with shipping. Paul Pgaski@hotmail.com |
Posted By: behindpropeller
Date Posted: December-11-2009 at 6:51pm
Remember that a '92 and '96 CC do not have a lift fitting like the 2001 series...etc. Tim ------------- |
Posted By: davee40
Date Posted: December-11-2009 at 7:58pm
|
Hey tim are you saying the lift ring wont fit a 79 ------------- davee40 lakeland,fl |
Posted By: davee40
Date Posted: December-11-2009 at 8:01pm
|
Jody since your online can you answer my question to tim ------------- davee40 lakeland,fl |
Posted By: Fl Inboards
Date Posted: December-11-2009 at 8:47pm
|
The lift ring on the 96 should work although it is not going to look like the one that came off the 79. Just make sure you get the stainless rod and all the nuts with the lifting ring. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Fl Inboards
Date Posted: December-11-2009 at 8:53pm
|
Dave,
You could use A front lifting ring on the rear however it will not have the spool area like a current rear one does. The slant back nautiques had two lifting D-rings recessed between the platform and the hull. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Pgaboeing
Date Posted: December-11-2009 at 9:49pm
|
Dave, I do have one front lift ring left, I always send all hardware with all the parts that I've been selling.
|
Posted By: davee40
Date Posted: December-12-2009 at 11:07am
|
Hey paul could i get a pic of what jodys talking about and also a pic of the rear lift ring
Thanks Dave ------------- davee40 lakeland,fl |
Posted By: Pgaboeing
Date Posted: December-12-2009 at 10:19pm
|
Yes, Tomorrow I'll get the pics. Its been a long week at work and I just walked in the door.
Paul |
Posted By: davee40
Date Posted: December-13-2009 at 12:12pm
|
Not a problem paul take your time
Dave ------------- davee40 lakeland,fl |
Posted By: Pgaboeing
Date Posted: December-13-2009 at 7:58pm
|
Dave I just emailed you some pics of the front lift ring and stainless connecting rod and the rear d-ring with backing plate.
Paul |
Posted By: davee40
Date Posted: December-17-2009 at 7:51pm
|
got the pics Paul and the front lift ring will do send me the info so i can mail a check ------------- davee40 lakeland,fl |
Posted By: Pgaboeing
Date Posted: December-18-2009 at 1:01am
| Dave Email sent Paul |
Posted By: eric lavine
Date Posted: December-18-2009 at 11:36am
|
Paul, let me know when your ready. eric ------------- "the things you own will start to own you" |
Posted By: Pgaboeing
Date Posted: December-30-2009 at 8:24pm
|
Hi Eric,
The boats are ready, I want them out of the garage by Jan 8th. I was going to call you but can't find the number. Please let me know, I have another person that wants the 96ski. I am giving you first shoot at them. Paul Pgaski@hotmail.com |
Posted By: TRBenj
Date Posted: December-30-2009 at 8:50pm
Paul, I just sent you a handful of phone numbers for Eric. Hopefully he grabs everything and can take my stuff with him as well! Also, if you have a stut backing plate with a steering cable bracket attached, Id love to have one.
 ------------- |
Posted By: Pgaboeing
Date Posted: December-30-2009 at 10:39pm
|
Tim, Yes I have one. I will send you a picture to make sure it is the correct one.
Paul |
Posted By: TRBenj
Date Posted: December-30-2009 at 11:10pm
|
Paul, sounds good- thanks! ------------- |
Posted By: eric lavine
Date Posted: December-31-2009 at 11:49am
|
Paul, i didnt forget about you, when it snows the workload doubles and alot of guy's will take off during the holiday's, after the New Year, call me if there is an inconvenience at this point of the hulls being in your way ------------- "the things you own will start to own you" |
Posted By: Pgaboeing
Date Posted: December-31-2009 at 12:34pm
|
Sounds Good.
Paul |
Posted By: Cslaten33
Date Posted: January-03-2010 at 8:54pm
|
Hey guys where can I find a rub rail for a 1974 SN?
Thanks Clark Slaten-Cslaten33@msn.com ------------- Thanks Clark Slaten |
Posted By: Air206
Date Posted: January-03-2010 at 9:10pm
|
Clark:
You mean the stock aluminum?...... http://tacomarine.com/cat--Aluminum-Rub-Rail--cat2_aluminum_rr.html - TACO still makes them in sections......nice, shiny and in the length(s) you need........ Steve ------------- https://tinyurl.com/y6t5e3bu" rel="nofollow - 04 Air206 http://tinyurl.com/9urzgls" rel="nofollow - 91 Barefoot 78 SkiTiq |
Posted By: Gary S
Date Posted: January-03-2010 at 9:27pm
Just be sitting down Clark, before you ask about shipping charges for that rail,due to size it has to be shipped by truck. Last I read on here, West Marine,who sometimes carries it, is out of stock. Check this link http://correctcraftfan.com/forum/forum_posts.asp?TID=14365&KW=rub+rail&PID=188830&title=span-classhighlightrub-span-span-classhighlightrail-span-for-62-classic#188830 - Rub rail or do a search and check other posts on it. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: Pgaboeing
Date Posted: January-03-2010 at 11:45pm
|
Try shipping charges to Astralia. I priced just the instrument panel for Chopper, it was 1600.00 just for the one box on FedEx. This is with my company discount.
|
Posted By: flflyer19
Date Posted: January-05-2010 at 10:07pm
|
Hi Paul,
I got the engine in the boat last weekend. It runs great and the boat has unbelievable performance. I cut down my prop shaft to 51” and it was perfect. I am a bit under propped but will deal with that this summer. Thanks Kevin |
Posted By: eric lavine
Date Posted: January-06-2010 at 5:55pm
|
Paul, give me a call when you get a chance, 877-369-6693 or my cell 330-322-8817, im looking at Saturday and had a few questions. thanks again Eric ------------- "the things you own will start to own you" |
Posted By: blink
Date Posted: January-12-2010 at 8:39pm
|
Paul I am interested in the rear seat back of the 96 I have a 94 white and red thats all I really need but if you don't want to break up the set I'll take the whole interior, just let me know ,I will send you a check or money order.email me at blink@comcast.net and I can maybe get Eric to pick it up for me thanks ------------- BTW looks like I lost my 82-2001 to sanity |
Posted By: Pgaboeing
Date Posted: January-12-2010 at 9:50pm
|
Eric, I just saw the post. I will give you a call in the morning at the shop.
Paul |
Posted By: Pgaboeing
Date Posted: January-12-2010 at 9:50pm
|
Hi Blink, The only interior I have is for the 92ski. NO Rear Seat.
Paul |
Posted By: blink
Date Posted: January-12-2010 at 11:44pm
|
Thanks Paul, I'll keep looking.Let me know if you hear of any. ------------- BTW looks like I lost my 82-2001 to sanity |
Posted By: Pgaboeing
Date Posted: January-12-2010 at 11:51pm
|
Blink I do have a brand new airguide speedo if you are still looking.
Pgaski |
Posted By: m76nautique
Date Posted: January-13-2010 at 9:33pm
| Is motor still available and if so how much and is there anything it needs besides a boat to sit in? |
Posted By: Pgaboeing
Date Posted: January-13-2010 at 11:32pm
| Motor Sold. |