Print Page | Close Window

1.23:1 transmission compatability

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=5075
Printed Date: May-29-2024 at 6:39am


Topic: 1.23:1 transmission compatability
Posted By: Chopper
Subject: 1.23:1 transmission compatability
Date Posted: October-27-2006 at 1:40am
Can anyone tell me if you can bolt the PCM 1.23:1 transmission up to a chev engine.?

I know some nautiques have an apex (chev) option, so I'm guessing it is possible. Maybe with an adaptor plate or something.?

Anyone.?

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski



Replies:
Posted By: TRBenj
Date Posted: October-27-2006 at 7:59am
Yup, they should work. All the new CC direct drives have Chevy motors (5.7 Excalibur, 6.0 ZR6) and come with the 1.23:1 tranny.

-------------


Posted By: eric lavine
Date Posted: October-27-2006 at 9:09am
chopper, i believe i have a bellhousing to bolt up that trans   eric

-------------
"the things you own will start to own you"


Posted By: Chopper
Date Posted: October-29-2006 at 7:50pm
Eric,
What's a bellhousing worth.? I may not need it, but if I do, I'll let you know.

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski


Posted By: 79nautique
Date Posted: October-30-2006 at 8:27am
if you don't have the right bellhousing you won't be bolting the tranny to anything and you won't be able to use the bellhousing that is on it if it was mated to a ford motor.

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique


Posted By: Chopper
Date Posted: October-30-2006 at 10:33pm
79,
what I meant was I don't know if I will be replacing the pcm windsor with a chev based block.

windsor parts are hard to come by here in oz. chec parts are dime a dozen.

I'm just looking at options if the motor is a dud.

-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1540&sort=&pagenum=2&yrstart=1996&yrend=2000 - 98 Ski



Print Page | Close Window